Search results

the tank, the line that goes up into the handpole i just took it off quick while riding to make sure the tank was breathing. If I take out the overheat sensor from the head will it work right.

the cooling lines are hooked up properly and the stock overheat sensor is installed

bump

I just put a 701 out of a waveraider in my superjet and it has a msd enhancer and protec pipe. When I put it in the water it will run good for a couple minutes and then just cut out and not go above 1/4 throttle. I hooked the gas line from the gas tank right to the carbs and took the breather...

I ordered a MSD enhancer from amazon and ill get the white with red stripe wire hooked up and see what happens

I just put a 62t 701 out of a waveraider in my squarenose. First of all the CDI and starter relay were bad so I put those parts in from my 650 ebox. Also there was a white wire with a red stripe in the ebox that had two male ends so I left them unhooked. The motor was just rebuilt and has an...

I got a 62t 701 for my squarenose and it was just rebuilt what should I do to break it in.

bump

I have a square nose that had a 650 and now has a 701 62t I had a protec pipe on the 650 and was wondering if it will work on the 62t or is the manifold the wrong size and if so can it be opened up to the right size?

how much

will a lowered roundnose handpole bracket work on a squarenose or will the pole not sit right on the hood

how much 2 part foam do I need for a superjet tray

still not sure what to do

I have the tray cut out of my squarenose and was wondering what the best way is to re foam it. Should I glass the tray back in and drill holes and dump the foam in or put the foam in first and them trim it down and glass in the tray. If I should glass the tray in first how many holes should I...

will a roundnose lowering bracket with a stock roundnose pole sit right on a squarenose hood

what is better for a superjet a 760 or 701

what are the advantages of cutting 3 inches off the back

what is best to use for filling chips and dips in a jetski is bondo alright or should something else be used.

what is the best way to cut the tray to defoam cut the whole tray out or just the floor and squares in the sides

heres some pics I think im gonna try and fix it unless I find a hull soon