Search results

How many of those are in there for fuel system related issues?

Unfortunately that is true. From what I've heard, he died from either a heart attack or sudden cardiac arrest. He was only 23 years old.....

Will the V3 chamber be stamped stainless or stamped aluminum?

Tim, are you willing to share any more details about the V3 right now?

Hit refresh. It's on now.

Spoiler alert, they don't.

Just out of curiosity, have you ever calculated the actual displacement of the ET motors?

TPE makes a +4mm 1021cc engine with the lightweight 72mm PHP crank as well. I own the first two that Erik made and I am extremely happy with both of them.

Those bolts will go through the manifold without any problems if you unbolt the manifold from your cases and install all four top bolts in the manifold before bolting the manifold to the cases.

@Viperpilot - where are you getting this information about HF in Lithium Iron Phosphate Batteries? HF gas is mentioned as combustion by-product produced during a thermal runaway event, but Only in very low concentrations...

www.Greenhulk.net

The rear exhaust runner on the OEM 64X exhaust manifold is way too small for any high performance application.

Does the coupler end of the older/lower chamber have o-ring glands on it like the old speedwerx pipes?

Your 98 octane is our 92 or 93 octane

No, it's actually the same fuel. The octane number is just reported differently. In the United States, Canada, Brazil, and a few other countries the Anti-Knock Index or Posted Octane number shown on the pump is derived from the average of the Research Octane Number and the Motor Octane Number...

Yes, "XL" is the designation for the 22mm driveshafts. There are three OEM Yamaha driveshaft diameters: 20mm, 22mm, and 25mm Skat-Trak makes 155mm Impellers for all three driveshaft sizes.

I used 1"x2" furring strips to make a frames to pull the pegboard off the wall about 5/8". You can get a pack of 100 pegboard hooks on ebay for about $20 shipped. (I use the 4" hooks more than any other length).

I built two of these so I can store all of my skis in my shop over the winter. I decided to make the ramp that connects the storage stands to my shop carts to eliminate the possibility of dropping them.

If you're limited on space you can buy a few 4'x8' sheets of pegboard or slat board and put your walls to use.

$80 for the investment cast 17-4 stainless pump stator and wear ring plus machining out of Japan? Please direct me to any Japanese manufacturer that can make parts like this for $80