Search results

No time table on them really but if the engine is out spend the extra time n bucks for the new seals for reassurance. You will need a stator cover gasket n some case sealer as well

Still have it guys. Getting a thin coat of dust on her. Might have to stick it outside for a wash

Bump

Clear silicone and lots of it. You can maybe get the stock rubber piece that goes in the OEM rubber piece in there. It has holes for all the wires. If you use silicone use a brand like boat life. It dries very good. If you can reach underneath and wrap something around do any extra doesn’t drop...

I painted mine with the duplicolor paint shop paint. No need to mix up. Just pour into gun and shoot. No matter what you still have to do the basics correctly.

My totrailer had a nice pleather couch the folded down into a decent size bed then would fold up into the wall to give clearance to put my race bike in. The brand was from “happy jack” I believe. I had a bed lift in it also from the happy jack company but it’s probably easier to do the folding...

Yeah definitely is how things go. It’s why my SJ took so long. But every little bit counts. I would sneak into the garage and put 5-10 mins in every once in a while just to keep the ball rolling. Doing the same thing with my truck now. I was outside last night with a flashlight trying to get the...

Still have it. Could make a great Xmas present.

You can get a hose with the check valve at the end. You shake it and it creates suction and pulls out the gas. You can also disconnect the fuel line going into the carb and disconnect the hose going to the check valve on the fuel tank. Take an air hose and blow into the check valve with a burst...

Biggest thing you need for that ski is an extended ride plate to keep the front end from bouncing. Ski is very light in the front and is a bouncing machine as soon as you hit some bumps. That’s even with the trim going down. I would have to hang over the front in order to keep speed and try to...

Still available

Lol, a lot better than that notification. It’s weird, it actually stopped for a while then started back up. Not the worst thing in the world

Still available. Currently can’t meet anyone or deliver it. I have my truck all apart for some needed attention n some goodies.

Does anyone else experience this? When I sign into the forum, I always go to my notifications first and go through them. After I’m done I hit the x-h2o logo to basically start from scratch and it puts me back to the beginning where I need to sign in again. After it started doing this bc it...

Thin piece of piano wire can work too. Might be able to wedge in between and run back n forth till it pulls apart

Just good old thin screwdriver or something thin to pry apart. Once things are apart you can scrape 5200 off with a razor blade.

Try to cut along the old cut line on the back n top of the foot holds. I used a dremel with a Sabre cut blade. If I were to do it again I would have use an air saw. Blade is thinner and the process is much faster.

Wow, got your hands full on that. But, You have some nice reclaimed project wood there.

On our way back home. Crossing the Delaware bay on the ferry. Little rough out, 4-5 ft. rollers.

Sitting at Fish Tales in OC Maryland for happy hour grapefruit crush’s. Couple skis out in the water today.