Yes! looking at the graph it makes more since. Thank you again sir! I do not remember the squish, just that it was within spec 6 or so years ago when I put the engine together. I changed the timing from 34 to 32 so that should keep her from blowing up.
It will not blow up on 34.Yes! looking at the graph it makes more since. Thank you again sir! I do not remember the squish, just that it was within spec 6 or so years ago when I put the engine together. I changed the timing from 34 to 32 so that should keep her from blowing up.
If you go back far enough in this thread I posted my 1107 curve based on Arts suggested MSD curve. If you cant find it PM me and I’ll send it. I think it was 32 degrees starting at 1500 to 6k then down to 21 at 8k. Something along those lines seems to be pretty standard.
I think I found it:
I think I found it:
Sounds right but that’s when I was trying more timing. I’d stick to 32 max.
Thank you!
Yes its real. I have been working on these with zeeltronic for the last 3-4 months. The static angle and curve has all been done and its been running in a few skis so far. Its in the middle of the resting stage with myself and another tuner at the moment as well who I will not name unless they decide to name themselvesIs this real?
Sent from my SM-G988U using Tapatalk
This is was what this was all about
Another tuner posted above pic on Facebook...
Yes i thought he took it down. its not been released yet but since its out there I thought I may as well spill the beans so to speak
No its nothing to do with me, I was just helping out with the back end static angle and curve writing
