Ducky
Back in the game!
- Location
- Charlotte, NC
Spin it on the driveshaft and see if you have an issue....
Freestyle For real?!?!~Rosie's Official WDK R.I.P build thread ~
- Thread starter Roseand
- Start date
Spin it on the driveshaft and see if you have an issue....
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Props is to Pumps = Jets is to _ _ _ _ _
Figure it out.
Figure it out.
Well duh, I could if it was here. I'm just in a pinch hoping my pump comes Saturday so I can run it asap on Sunday, so I figured it'd be worth a shot to ask if the spacing might be different.
Sent from my SM-G920V using Tapatalk
When working with aftermarket parts, assume anything might be possible.
If I understand correctly, you will be getting an assembled pump, you will be removing your impeller from your pump and putting that on the new pump, correct?
If so, why even ask the question if you will undoubtedly find the answer doing exactly the steps required to put your machine back together, on top of having the washer from your previous setup to use if it does, in fact, interfere?
If so, why even ask the question if you will undoubtedly find the answer doing exactly the steps required to put your machine back together, on top of having the washer from your previous setup to use if it does, in fact, interfere?
SpaceCowboy
breaking something
- Location
- Ypsilanti Michigan
Because it's Rosie and he likes hearing himself talk. I heard he has "what if?" tattooed on his lower back.
Just have some darn washers on hand.
See! Someone answered the damn question without being a dick. And it was lumpy out of all the assholes
Yes, it was something that I would eventually find out. But I asked incase I needed to get some washers to save me some possible downtime.
Sent from my SM-G920V using Tapatalk
There's no chance! I'm too much of a pussay for a tattoo in a sensitive area like that!!!
Sent from my SM-G920V using Tapatalk
And it was lumpy out of all the assholes
Sent from my SM-G920V using Tapatalk
Just because I like reminding you sometimes about statements you've made, like the time you boasted about how you were going to go full rotation in the first week with your first am hull, doesn't mean that I don't want to see you succeed.
Captain PegLeg
GJP
- Location
- Villa Rica, Ga
BruceSki
Formerly Motoman25
- Location
- Long Island
All this talk about hookers rubbing my mag has me excited.
I just hope Rosie foots the bill when she wants to get paid.
I just hope Rosie foots the bill when she wants to get paid.
SpaceCowboy
breaking something
- Location
- Ypsilanti Michigan
Well if you guys are gonna bitch about me asking questions, don't answer them. It's as simple as that
Sent from my SM-G920V using Tapatalk
You had three people answer it!!!!
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Since you did not respond. Here it is.
Props is to Pumps = Jets is to Carb.
What this means is setting the distance a prop is to the pump, or prop pitch, or bored nozzle or stubby cone is all part of the pump tuning. Just like jetting changes. Every setup is different.
chadman154
#Itsonlymoney !!!!!
- Location
- Dirty south
Rosie breaking in the ice instead of the ski! Ice was about half inch thick!
Was this yesterday? ?? My lake is wide open!!!
Yeah dude! The pond had some much thicker ice than expected..
Sent from my SM-G920V using Tapatalk
chadman154
#Itsonlymoney !!!!!
- Location
- Dirty south
any good video???