RICKTER talk

ThatGuy

ThatGuy

Site Supporter
Location
NJ
Am i missing something but this looks like a great idea. i can't believe nobody commented on this. Do you want to make more? i cant be the only person that would want one. If you don't can i get a little more instruction on how to make. It looks super clean and strong.


Idok said:
mine went right together as well...granted, the pump shoe was already in it when I recvied the hull...

kawi 750 cable in there as well with a 61x motor, TLR 48 with stock throttle drum


006.jpg


here's a pic of the installed noserail....still ging to pull it back off and run a bead of black 5200 round the nose..

used 1" SS carriage bolts, a 1" washer and nyloc..........put the first bolt about 4.5 inches from the front edge of the turf, then spaced about 5" apart

it feels rock solid like you could pick it up from the rail


and ZERO holes thru the nose!!!!
Click to expand...
 
Last edited:
Matt_E

Matt_E

steals hub caps from cars
Site Supporter
Location
at peace
tricky1 said:
The rickter is a nice hull. The fit and finish are by far the best out there.
Click to expand...

Until you start riding them. :lmao:

J/K.

Take a look at a Lightweight.de hull when you get a chance. Those hulls define the meaning of fit and finish.
 
SuperDan

SuperDan

Location
London UK
Im ordering one of these literally within the next few days..

Does the Fr2 come with a scupper standard ?

Can you run a blowsion dual Bilge bracket from the SJ in one of these?
 
badvinny

badvinny

Location
Saskatoon,SK
Yes they come with a scupper installed, coupling spacers to move the motor forward if you want, adjustable motor mount bases, hoodseal, footholds, 2 breather tubes, and a pole bracket, all installed already. I think you can fit the dual bilge bracket but dont really need dual. If you get a newer one they are using a new style hoodseal that is excellent!
SuperDan said:
Im ordering one of these literally within the next few days..

Does the Fr2 come with a scupper standard ?

Can you run a blowsion dual Bilge bracket from the SJ in one of these?
Click to expand...
 
Twinturbostang

Twinturbostang

Location
CT
Are any of you Rickter guys unhappy with the width of the adjustable foot holds? There's over 2 inches of width you can get the holds in the pocket more. I'm working on a bracket to fix this.
 
ThatGuy

ThatGuy

Site Supporter
Location
NJ
Twinturbostang said:
Are any of you Rickter guys unhappy with the width of the adjustable foot holds? There's over 2 inches of width you can get the holds in the pocket more. I'm working on a bracket to fix this.
Click to expand...


Don't forget to give them some height adjustment also. I know there is at least a inch or 2 of room. I will take a pair
 
You must log in or register to reply here.
Top Bottom