Search results

Yea I don't think I would trust 1/16" wall thickness. Looks like I might have to switch to the solid color silicone hose.

Does anyone know what material the colored translucent hose is?

It looks like the stuff FRI sells isn't translucent and ATP doesn't have 1/2".

Hey, Does anyone know a good source to get translucent blue 1/2" id colored tubing? Ideally i would like the color to match that of the stuff Fast Fuel Line and Blowsion sell. Thanks.

What sort of temperature changes are we talking about? Like a cold motor vs warm or the difference between a 80deg and 95deg day? Being that they are billet rather than cast I could deffinately see them being more sensitive to temperature. I actually reached out to Phil Clemmons, yesterday as...

Hey yaw, Has anyone tried out the XScream 50mm Carbs? If so, how do you like them? What are you running them on? And have you found them to require frequent adjustment to keep them dialed in? I just picked up a XS1060 and I am considering going that route. Thanks

If your ever in the Annapolis area, let me know. There are a few of us that ride the South River alot.

I could deffinately be down to come up for this!

Another option is Weld Mounts. Rather than using a rivet to hold them in place they are made to be epoxied on.

Nice Build Bro! I'm digging the grassy trailer! I honestly cant tell if that's fake grass or real!

I admire your creativity! I had the same concern with my SJ. The previous owner put the bilge outlet way too low and it would frequently suck in water. With that said, you have a couple options. Rule actually does make a 3/4" check valve. Here's a pic of it. These actually fit really nicely...

So how do the Blowsion Dasa motors compare to other builders as far as the Case and Cylinder porting? The current prices are looking pretty hard to pass up.

I believe the issue lies mainly with the plastic material the bunks on the Jetlift carts are made out of. They are intended to be somewhat slippery, and that makes bonding anything to them difficult. I will admit that when I did my test patch I didn't rough up the surface at all, just cleaned it...

I would definitely buy one of these when you all are finished!!! Btw, Is that carpet on your Jetlift bunks/sliders? If so, what did you use to glue it down with? I have been preparing to do the same thing to my Jetlift, but after gluing down a small test patch with DAP contact adhesive I found...

Glad I could help.

Its most likely just a different brand of smooth hydroturf. Its deffinately softer than the smooth hydroturf, but i have found the stuff Rickter uses to not be very durable. When it comes time to redo mine I will deffinately use smooth hudroturf...

Sandblasting or bead blasting hands down. Way easier than chemicals, sanding, scuffing or wire wheels. Whenever I am going to blast parts with sensitive areas like say a cylinder or cases, I just heavily tape off anywhere that I don't want to get blasted or media to get into. Then just vacuum...

So do you still run dual 3/8 cooling feeds and dumps in those temps? Any restrictors?

Hey yaw, With the water temperature continuing to drop, I'm wondering if I need to adjust my water routing or potentially add restrictors in the cooling lines? I took my ski out for the first time in about a month 2 days ago and again yesterday and the water temps were around 65 deg F. I...

I honestly haven't bothered trying to reach out to either of them for this latest batch of issues. But you make a good point, I should probably at least send TC an email about the issues I had and hopefully it will get back to RRP.