Search results

Remove your flame arrestors, start the engine and look down the throat of the carbs as you rev it. As Harbor said, it will let you see if both carbs are opening, but it will also show you if both carbs are getting fuel, or if the fuel is atomizing or just dribbling out. Most importantly, it will...

I picked up one of the Weeks Brothers E-Box covers at Daytona this year, the fit, finish and function was so nice, I had to try some other of their products. I ordered their flame arrestor covers and one of their Pack Out jetting tool kit. The flame arrestor covers fit great and they are well...

I bought one of these Vevor tools for porting. On the first port job I did with it, the flex shaft broke internally. I was really disappointed as it was doing a nice job.

Mark, Did you run the stinger mod? If so, did it make a difference?

I built a 701 years ago with a new SBT crank. The crank's rear bearing failed after two hours of running. I cussed SBT and then ordered an ADR crank. I put back it together with the ADR and ran it, after about another two hours the ADR's rear crank bearing let go just like the SBT. I pulled the...

VK Composites owns the factory that builds Rickters, not RRP. They just where RRP T-shirts for the Rickter walk thru videos. They also build their own race hulls and who knows what else. Maybe Rick Roy had a falling out with them.

Seth, you are an artist, nice work, now let's ride that thing

Put it on two "V" blocks, with a dial indictor, find the high spot, mark it and hit it with a hammer, they bend pretty easy. I've straightened a few of them, it's not hard, you don't even have to remove the shaft from the pump.

Don, you should show some pictures of the turf job you did on the Blowsion ski, it's a work of art

Looking good, don't forget to glass the underside of the foothold to the bulkhead, mine was not done.

Wow, I imagined your shop with pink and green and other colors splattered all over the walls!!! But, I'm impressed with your organization

Puss, I'm 65 and still going.....

I always loved that video, I haven't seen it in years. Thanks for posting it again

SOLD!!!

It weighs 308.5 lbs. ready to ride with a billet X-Scream, aluminum tank and a stainless Solas pump.

I don't know, I guess I could weight it fully assembled

Original Trendsetter Backy Chan. Hull has been reinforced for surf riding. The engine compartment and pole area is carbon reinforced, the bottom has two layers 1208 biax and one layer of carbon. It has a front foot hold and removable rear bond rail wedges for surf riding. Two ride plates, pole...

If you are running a Zeeltronics setup and did not weld the ring gear to the flywheel, check it to see if it's slipping

Sorry you missed the surf today, we held a Happy Birthday ride in honor of you!