Search results

ttt

$250 shipped. one of the few brand new ones left on this planet

i'd rather have that Coffman TS/SC pipe and waterbox that's on the shelf.

just tighten the cable until its straight or fool with it until you like the starting position. i think i have my hurricane 1200 with the nozzle slightly up

that looks like the bearing section of the driveshaft holder bearing. the rubber separated from the plate that bolts to the bulkhead and the bearing slid forward. the second you drop that ski in water, water should come pouring into the engine compartment. that is the same part that comes on...

like I tell everybody, one carb gives you half the power of 2. in reality, you get a lot more power out of a properly tuned dual setup. the bigger the carbs, the more rpm you get. that's why all the old race boats I picked up always had dual 48 novis, blackjacks or full specs on a 701. I think...

its easy to know if it needs a jet or not. just blow on the return line and if it is restricted, it'll allow very little air to blow thru. it'll be obvious

sounds like the inline fuel filter or the bucket filter in the carb is plugged up, since you haven't even mentioned looking into the carb or fuel system

its a proven fact that all the performance gains from the Coffman 1100 pipe on the sitdown, were had from the Coffman waterbox, not the pipe itself. that means either the waterbox was more or less restrictive than stock. I don't know which. I've had and sold a few of them and they are rare and...

like brand new 15.5 skat not a scratch $140 plus shipping. 916 334 3786 if you want it.

always my favorite are the ones that get thrown in for basically free when I buy some beater for next to nothing. I've never bought a new stand and had dozens I like the taller ones so your ski can sit in deeper water. the old KG were taller and I have on old water dog that has wheels and...

ttt

ttt

is it just pistons or rings also?

47s or 50s might be some useful info

I have a huge pile of the old school carbon tech reeds that BK and everybody else rants and raves about them lasting forever. I got these when I bought out the rest of carbon tech/3dayparts/gator grip some years ago. there are even sheets of reed paper for cutting your own reeds. nick bonanno...

this makes no sense at all and is totally incorrect.

a little PJS 800 gold to feast your eyes on if you're into this sort of junk.

here's a clue for you