Search results

On my 2013 RN, the surfaces are almost parallel at 5 degrees. RN plate mount angle is very different from the SN.

Good Idea to make Cable installation and removal easy. But why am I seeing a Red Cable and a Black Cable both attached to the same Post? o_O

"There once was a fella named Finnegan, Who escaped from a jail, so to sin again He broke laws by the dozen, He even stole from his cousin, So the jail he broke outta he's in again." Lt. Colombo

https://www.etrailer.com/faq-how-to-tell-weight-rating-trailer-axle.aspx Can look at Axle Diameter and Wheel Bolt Number to estimate Trailer Capacity since the Axle and Wheel Capacities must not be exceeded. Note that an Aluminum Trailer with same Axle and Wheels as a Steel Trailer can carry a...

Had run-ins with Boaters in Florida in the past... But keep in mind that every Fisherman carries a Fillet Knife... And a 90 lb weakling with a knife can cut down the Toughest Guy in seconds. Beware...

Careful with those Quick-Connect Fittings. They can fail and cut-off flow... Had this happen with "Tusk" brand Fuel Quick-Connects. Worked like a charm for a couple of months and was slick being able to pull the Carbs without having to pull hoses off the Carb Nipples...

Stator Charging Coil with Layer Short. Starts to fail when warm...

Question about using Paper(?) Dixie Cups... Most Paper Cups and Bowls come with a Wax Treatment for water-proofing. Won't the Wax contaminate the Epoxy-Resin Mixture?

That's impossible o_O. Unless there are Barnacles inside the Engine, that Engine would have run good for another 10 years :p

Hunter's? Probably big Crack in it :D

Still room for a Tool Box and a Lunch Box :D

Did you find and fix the issue? What was the Root Cause?

Someone needs Angler Management :p

A Friend put out a Boat Engine Fire with his Jet Blast, not the required symbolic Extinguisher. :cool: Like who is going to climb onto a Fiberglass Boat that is on fire with a puny Fire Extinguisher Bottle? o_O The Stand-up Water Fountain for the win...:p The reality is that the tiny...

6G all position with the Squirt Gun and the Stick upside down with a mirror?

Maybe one of the Pulse Fittings or Pulse Hose is leaking. Repeat the Air Leak-down Test. Connect the Test Line to the original OEM Pulse Fitting/Hose. You mentioned that the Original Carbs were severely corroded. Maybe the Exhaust Manifold, Head Pipe or Chamber have pin holes. Is the Exhaust...

Rides a GPT Chat 2.0...

Maybe the Brass Bushing is worn...

What is the actual measured pop-off pressure on each Carb? Those A/M Mikuni SBNs normally come with 115gr Springs. HSI could have forgotten to swap or installed wrong Spring? You could insert a Jet (try a #60) in the Return Line to raise the Fuel Pressure going into the Carbs so that the Needle...

https://www.amazon.com/Cooling-Weather-Reflective-Clothes-Pockets/dp/B09T9PPV4B/ref=pd_ybh_a_sccl_5/141-4956109-1082702?pd_rd_w=j0tON&content-id=amzn1.sym.67f8cf21-ade4-4299-b433-69e404eeecf1&pf_rd_p=67f8cf21-ade4-4299-b433-69e404eeecf1&pf_rd_r=KRHQDY1N0S4ME8PRQHQG&pd_rd_wg=KHrMm&pd_rd_r=bfbde6f8...