DIY Total loss or MSD TL upgrade box 270USD?

[augustaf]

No, you don't need the 64X box. I notched, then filed a notch in the plastic mounting base of the Zeel. In the pic- you see it is being retained on the right by that notch pushing against the housing back , on the left- it pushes against the solenoid rubber. The bottom rests flush against the housing and the top is being retained by the stock wiring bracket. So that it doesn't get squeezed to tightly, I inserted a 6mm fiber washer (not visible) between this bracket and the aluminum base. The Zeel is held firmly , does not jiggle around. I actually prefer this over using the 64X rubber retainer- I like to see the unit have at least some heat exchange (touching the base), rather than insulating it in a rubber surround.
I also prefer the 64X coil- it has resistance wires- Borut had mentioned to use resistor plugs, he probably knows something, after all he's from the same neck of the woods as Nicola Tesla...

 

[OCD Solutions]

All we need now is for somebody to start manufacturing the blank case grommets that Yamaha doesn’t offer anymore.

How cool would that be?

 

[waxhead]

All we need now is for somebody to start manufacturing the blank case grommets that Yamaha doesn’t offer anymore.

How cool would that be?

Ha ha very cool

 

[Jyzmbe]

All we need now is for somebody to start manufacturing the blank case grommets that Yamaha doesn’t offer anymore.

How cool would that be?

I have been wondering who was going to do that


Sent from my iPhone using Tapatalk

 

[OCD Solutions]

Jetmaniac’s been bugging me to do it for over a year now.

JSTL tried to get me to do it over 2 years ago but he got impatient and I shipped him all the OEM blanks I had so I could never make the molds.

 

[Storbeck]

I thought I bought a couple of those from the Maniac end of last year, are they only recently unavailable?

 

[waxhead]

Jetmaniac’s been bugging me to do it for over a year now.

JSTL tried to get me to do it over 2 years ago but he got impatient and I shipped him all the OEM blanks I had so I could never make the molds.

Are they still doing ignition systems

 

[OCD Solutions]

Are they still doing ignition systems

No, this was back when he was first starting up. Maybe it was three years ago.

 

[Jyzmbe]

I bought 4 or 5 a years or so ago. I had a buddy asking for them but when I searched it was unavailable everywhere. I only have a couple left


Sent from my iPhone using Tapatalk

 

[OCD Solutions]

I shipped off a bag of the blank grommets to Jetmaniac and plan to keep him stocked up going forward.

If anyone has any new or minty condition OEM blanks, I would be very interested in making a deal for 4 or 5 so I have some nice clean blanks for making future molds.

The molds pick up every little blemish and while these are 100% functional, my OCD says they can be better.

 

[charliewilson]

Can a non-resisted spark plug terminal be used with the Zeel?

 

[Jr.]

Can a non-resisted spark plug terminal be used with the Zeel?

 

[Jr.]

Warning ! This last batch of Zeel
PDCIS-02T CDI were Not preprogramed with the WAX curve!
Make sure what ever source your getting your CDI from, they flash it with the default curves if your keeping the CDI in stock form!

Ski Ya, Paul

 

[Harbor]

Can a non-resisted spark plug terminal be used with the Zeel?

Do you mean to say, can you run resister spark plugs but use non resisted plug boots ?

 

[speedysprocket]

So is that why [mention]charliewilson [/mention] hasn’t been able to get his to work...?!

 

[waxhead]

Yeah that will be why. Im surprised he has not been sending it out with the setup on it, has anyone mentioned it to them

 

[beerdart]

Zeel map as received from the new batch.

 

[Storbeck]

I think that static angle is wrong isn't it? I don't recall off the top of my head but I thought it was fifty something degrees.

@waxhead probably knows it offhand.

 

[waxhead]

Zeel map as received from the new batch. View attachment 393677

Thats the Kawasaki static angle but it is the wax curve. I have not checked the Kawasaki static angle myself but thats what they are saying it is

 

[waxhead]

I think that static angle is wrong isn't it? I don't recall off the top of my head but I thought it was fifty something degrees.

@waxhead probably knows it offhand.

56 degrees