TNT v2 free ride production pipe

[JoeD]

Is the tnt manifold same as rrp with smaller diameter than pfp manifold?

 

[SmittySX]

Pm sent...

 

[erik mx45]

can we get that anodized ?do u do that also?

 

[Big Kahuna]

View attachment 297248 We love horsepower

These were at the Blowsion tent right?

 

[Ducky]

These were at the Blowsion tent right?

yep.

 

[tntsuperjet]

You can get the manifold anodized if you want but we don't offer that.
Keep in mind cast doesn't come out as nice and shiny as billet does or extruded.
If you polish it then anodize it doesn't look to bad
Yes I brought couple pipes to Blowsion booth.
There was a v2, v2pro and a v3 pipe there along with manifold and water box

No the manifold is not the same
It is actually larger in diameter not smaller.

 

[JoeD]

Manifold larger diameter than pfp also?

 

[DAG]

Is the mani from the same casting as RRP/PFP I think is the answer they are asking.

 

[Ducky]

Manifold larger diameter than pfp also?

The inside diameter of the manifold where the chamber meets the manifold is machined bigger than the manifold that comes with the pfp and rrp pipe.

 

[JoeD]

Thanks, I have rrp pipe and thinking about trying the tnt chamber. They are all the same manifold I think but rrp has what looks like a pressed insert to make diameter smaller than pfp manifold. And sounds like tnt is machined even larger than pfp. Somethjng to think about if your just looking to buy a chamber to try.

 

[tntsuperjet]

You can use a PFP manifold but it won't be perfect as our pipe has been made to fit our manifold.
The RRP manifold needs a counter bore for the chamber or the flange cut off the chamber

 

[jo5hi3]

You can use a PFP manifold but it won't be perfect as our pipe has been made to fit our manifold.
The RRP manifold needs a counter bore for the chamber or the flange cut off the chamber

Does cutting the flange off change the way the pipe works at all?

 

[tntsuperjet]

Here a prototype v3 the welds are pretty ugly because I'm still playing with seam length to figure out best weld.
You can see the first 12" where the v2 hits on the dvx has been smoothed out so it will fit without hammering

 

[Jyzmbe]

I'm glad it fits a DVX now


Sent from my iPhone using Tapatalk

 

[IceMan]

So, only the V3 fits a DVX ????

And what is the difference between the V2 and V3?


Sent from my iPhone using Tapatalk

 

[Big Kahuna]

V3 is a stamped construction chamber vs a hand shaped and welded.

 

[tntsuperjet]

The v2 will fit the dvx but you need a little love tap on first weld joint

 

[Jetfiend]

It fits the DVX with slight adjustment.

Thanks Tim!

 

[Aquaholic]

It fits the DVX with slight adjustment.

Thanks Tim!

 

[Quinc]

Any discount if we get the pipe in halves and do our own welding?