Search results

I'm using a Versi-plug Max, works great, no problems so far, been in for a year now. I haven't let my ski float upside for any length of time tho, considering that I never let go off it, regardless.

pic would be hepful, but your probally gonna have to fab up something. The slot in my umi pole blew out, so I had to make a holder for the steering cable, been there for 4 years now without a problem. I used a piece of 1/8x 1 flat stock, drilled 2 holes, cut a slot, and ground a taper. As I...

What pipe are you running? I see aftermarket head in pic.

What cam are you using?

my buddy wears Slippery switch pants over his brace, w/o any problems. Or go with one size bigger wetsuit

That's a Goki replacement bracket. I bought one of those @ 5 years ago, same as stock as far as I could tell. Took 2 years of salt before the coating fell off.

22 ft pds, I usually do 11 first than 22

Like I said, got 8 seasons out of west marine oil, only needed a hone, still running strong. Only rebuilt due to hours, not failure.

Amsoil is nice smelling, but too expensive for me, I had 8 seasons on my sj with west marine oil(680 hours according to the tiny tach), before a rebuild. And I didn't need a rebore, just a hone, even with a limited b-pipe and a ADA head. I think the hype is too much. Just my opinion

I'd say Team Scream, they know their stuff

versi-plug max all the way, have never had a problem with it.

Thank you sir

not the best pic, but it's the only one that i have

What's the stock needle and seat on a 00 SJ. My ski is running too rich on the bottom, Ran great last year, Holds 8psi in the cases, engine: sport port, ada head 35cc, riva reed spacer,b-pipe limited, carbon tech reeds, stock pilot, 140 main. wasting plugs in 3-4 tanks. Thinking it's the...

My friend has relined a lot punps, usually in the 150 to 200 range including new bearings and seals

main jet #115, pilot jet #75, low screw 7/8 +/-1/4, high screws 1 +/-1/4, doesn't give pop off spec. This info is right out of my 95 sxi service manual

That's where I've been flushing mine for the past 9 years w/o a problem, Should work just fine.

Just looking for the high and low settings, single keihin Thanks

my favorite lately is loctite 380, rubber impregnated super glue, works excellent on hood seal to hull apps. Not cheap, but worth a try.

Congrats both, but are you sure that it's a flapjack? Not a repete? (that was from scott)