Search results

I would recommend soaking the broken bolt area with a quality penetrating oil (Kroil, PB Blaster) for a few days of repeated applications, then drill with a left handed drill bit, and use an EZ out to back them out. Agreed that it shouldn't have happened, but you should have good luck with the...

If you are interested, I have Pro-X piston kits, 82mm size, for $130 including shipping for two complete sets. Boring averages $50 per hole. Chances are your crank is perfectly fine, it's tough to kill an OEM Yamaha the way you described. Sent from my iPhone using Tapatalk

Ran fine last time we used it... Sent from my iPhone using Tapatalk

Cylinders are not plated. Bore them and you are good to go. Many opinions on pistons, cast are OEM equipment and are usually the choice for a stock type application. I have Pro-X piston kits in stock for a great price (OEM cast piston). Sent from my iPhone using Tapatalk

Yup, designed to be lifted that way: Sent from my iPhone using Tapatalk

List your mods... Sent from my iPhone using Tapatalk

Hope everyone has a great holiday weekend, be safe out there! And don't forget how to properly operate your 650SX ;) Sent from my iPhone using Tapatalk

Nothing to lose really. You can use some antiseize on your long bolt threads to make sure they come out easily. But it'll certainly get you by. Sent from my iPhone using Tapatalk

The Sea Doo 800 RFI motors had water cooled cases. I know some guys swap these cases to their 787 carbureted motors in an attempt to gain a denser intake charge. How much it actually does, I'm not sure. Easiest and most beneficial way to do this on a 6M6 bottom case half (650, 701, 760 bottom...

Did you completely disassemble the carb and go though it? Sent from my iPhone using Tapatalk

You can run a Kawi 1100 DI motor, same footprint as the regular Kawi 1100. I have a full swap available if interested! Sent from my iPhone using Tapatalk

If it was a crank bearing, compression would probably be much lower ;) Sent from my iPhone using Tapatalk

Yes, identical besides the 701 having the 61X CDI with a higher rev limiter. Sent from my iPhone using Tapatalk

Love my 07 2500 6.7 Cummins. She just turned over 333,000 miles and gets 22 highway! H&S tuned and fully deleted. Sent from my iPhone using Tapatalk

Correct. Some have a mark, most don't. Great way to save money, eh? Sent from my iPhone using Tapatalk

Just a little crust action from this Wave Venture! Sent from my iPhone using Tapatalk

When you get your new cables, be sure to wire brush your ground location on the rear of your starter and use dielectric grease on your connections, and you should be in business! Sent from my iPhone using Tapatalk

The 99 SJ would have a semi-gloss black engine with a blue exhaust from the factory.. Sent from my iPhone using Tapatalk

Went out and had some fun on the Blaster 2 760 today...just how it should be, the Yamaha towing a couple blown up Sea Doos, wide open! Sent from my iPhone using Tapatalk

Looks like a nice piece, anybody know the MSRP on each part? Sent from my iPhone using Tapatalk