Search results

first off is it going to adhere and be compatible with the current layup of your hull. second what if you live in ohio where the sun never shines. third who cares about the price. time is money if you can get an entire layup done in a day with no mess instead of a week of work on a project the...

ride 3 people my a$$. those things are small and gutless. what a douche bag

does hydroturf still give a discount for X members?

what is partially? mine had an 1/8 in gap for 2 seasons and i i just greased it more often. but if its more than that i would replace it.

better than 1100gph.

too new to have be havin issues like this. maybe the b pipe does not like the stock impeller???? not sure. someone on here will have some solid answers for ya.

could also be the driveshaft tube inside the tray area.

try to find a fine pitch for the threads. it looks like mcmaster only has course pitch.

the size is probably going to be 16mm. i used x-metal pole bolts but had to put the nuts on the inside with the flat base on the outside. as far as stainless goes use a 316 or the 304. either will be fine for your aplication.

deffinitely use the 650 electronics

have you had the pump out recently?

how in the heck do you find all this smurf stuff

you wont need much. buy a yard. use some west systems 404 filler to make a paste. glue them domn with the paste and lay some cloth around all the edges. i particularly like using the 2x2 twill glass from uscomposites.com

thanks to the lovely cleveland weather being neer freezing i cant really lay much glass this weekend. WTF it was 38 degess last night at the start of the second week of may. yah i almost believe in global warming. F this area.

i made mine. i posted the info in my build thread for ya.

i had it made. i cut the stock pipe and had a mandrel bent piece of tubing welded on. i got it from the link bellow, it was just slightly smaller in size but not much. i also made the plate at work that was welded on for mounting...

90 bucks to my door for 1152 balls

the start of the layup in the center of the tray was kinda tricky. i cut a sheet of glass roughly the width of the tray and only epoxied it to the dash area. i also did the same in the heel area from the underside. after it set i pulled the sheet tight to the pump area and duct taped it to hold...

for the build up of the tray... i wanted the tray to still be removeable in the event of a catastrophic failure. so to start i layed a sheet of glass on a piece of wax paper over a sheet of plywood. this gave me one thin layer that i 5200 down to the top of the pump cavity. this gave me an area...

factory will replace it. this is a somewhat common problem. call them up monday. PS dont tell them you were assembleing while intoxicated.