Search results

Are you running the stock ebox?

What flywheel are you running? Are you running stock electronics? I've heard you can run a stock flywheel with magnets removed on the stock 800 electronic system with no mods...?

I love my sxr1100. With all the info out there is a really easy build, I had all the parts I needed laying on the bench, pulled my sxr in the garage on a Sunday (after riding it the day before) and was riding the next Sunday . Insane power for the $. Bought a running 97 stx 1100 for $200, then a...

Don't personally know about lighter sxr handling, but I did notice that my sxr 1100 handled ruff water turns better than my stock ski did, seems like the added weight kept it from getting pushed around by the waves as much, guess it would have the opposite effect by lighting the hull..

Ya I've looked at the brawler, sxr top deck, super jet bottom. I guess my main question is which am hulls are capable of flat water bf's (or at least off a boat wake) with a limited sxr power plant but still be stable and a enjoyable rec ride boat for a big guy, I'm 6'1' 230lbs right now but...

What motor/ pump are you running?

What would be a lot of motor and pump? I'm running a stock bore/stroke sxr 800 with stock carbs , tau ceti arresters, v force 3 reeds, wet pipe, Tdr waterbox, #zero light stock flywheel, timing advance 6*, stock pump with 10/16 hooker, tbm stuffer, 80mm bored nozzle. I also have a r&d head...

Are there any freestyle hulls out there that handle similar to an sxr and can do flat water flips. I've seen the lightweight sxr hulls from bullet and trinity, and heard of one called the vengeance... I realize that the sxr was designed for racing and most ppl would not consider it a good...

Anyone got any cool sxr freestyle videos? Searched thru YouTube and found some but not everyone puts keywords in their titles... I'm building one at the moment so as soon as I get it back from the painter and reassembled (and the water warms up) I'll post some of mine.

While it's running turn the chock on about an 1/8 to a 1/4, this will create a rich condition. If it improves you know you need to open up the low speed screws alittle. If it gets worse than you need to lean it out(close the low end screw), but be careful doing this, too lean can be very bad...

Pretty major power increase from a 750 to an sxr. Handles way better as well, takes alittle getting used to, but once you do you'll love it . I believe they came new with 160psi so sounds like you have a good motor. Might as well upgrade to a. 10/16 hooker prop or equivalent if your gonna...

I agree with the 1100 comment, you can get pretty impressive power for not alot of money by doing a 1100 swap, theres so many threads on the subject it makes it pretty easy to do. And you can sell your stock 800 motor and buy a whole stx1100 donor ski with the money. May not be the answer your...

So i found an x-metal pole kit for an sxr on fastelements.com for $640... Is this a good deal? Anyone bought from there before? Sounds like its a complete kit ready to bolt on... Anyone have pics of their sxr with an x-metal pole installed on it? Any advice would be great

What is the weight difference between a stock flywheel and one lighteded by #zero? Been thinking about a #zero flywheel or a TBM charging flywheel, would it be worth the extra $$$ to get the TBM or should I go with #zero and spend the extra money elsewhere? Mainly looking for low end snap for...

I love my sxr1100, bone stock 1100 out of a 97 stx 1100 and im running high 50's. Great, even power and the extra weight helps to keep the ski planted and feels more stable. Def not a freestyle ski tho...

They way you ride i think you would benefit more from a set of training wheels...

Did you bore out the stock x2 nozzle

There are some wiring differences between '03, '04, and the rest of the newer sxr's. There is a sensor in the exhaust headpipe on the newer ones that the 03s dont have, not sure what else. As far as the hull goes there all the same. Whats wrong with the hull of the one your looking at? What...

How much for a complete hull? bottom, top, and hood.

Guess that means they work good,.. What brand did you buy?